Enter your e-mail address below to recieve the free N-TWO Newsletter


   

Hoses and Fittings Chart Specifications

PARRAP Material

Hose:
321 and 316L stainless steel
Braid:
300 Series Stainless Steel

CONSTRUCTION
Annular butt welded hydro formed closed pitched hose

CHARACTERISTICS
Extremely flexible ISO 10380 conformance, 50,000 cycle rated and pressure rated per ISO 10380.  Hose is designed to meet the most strenuous conditions.  Available in long length reels.

 

Minimum Bend
Radius

 
Nominal 
Diameter
(inches)

Actual
ID (MM)

Number
of Braids

Nominal
OD (inches)
Static
(inches)
Dynamic
(inches)
Maximum 
Working
Pressure
@70oF(PSIG)
Burst
Pressure
@70oF(PSIG)
Weight
Per Foot
(Pounds)
1/4 6 0 0.39 0.35   392   0.04
1 0.45 0.75 5.50 2790 11165 0.12
3/8 10 0 0.63 0.55   174   0.09
1 0.70 1.14 6.00 2000 8004 0.23
1/2 12 0 0.73 0.83   131   0.10
1 0.79 1.34 4.88 1526 6104 0.24
3/4 20 0 1.11 1.26   32   0.15
1 1.18 2.09 6.65 877 3509 0.36
1 25 0 1.37 1.46   26   0.20
1 1.43 2.52 7.68 688 2755 0.44
1 1/4 32 0 1.71 1.81   22   0.33
1 1.79 3.11 8.86 743 2973 0.68
1 1/2 40 0 2.06 2.16   17   0.40
1 2.14 3.86 10.04 616 2465 0.88
2 50 0 2.55 2.56   13   0.64
1 2.65 4.72 11.54 609 2436 1.35
2 1/2 65 0 3.19 3.15   10   0.79
1 3.28 5.90 13.58 467 1871 1.74
3 80 0 3.81 3.82   9   0.94
1 3.93 7.09 15.35 398 1595 2.30
4 100 0 4.63 4.45   7   1.12
1 4.74 8.58 17.72 311 1247 2.71
5 125 0 5.98 5.20   6   3.04
1 6.10 10.04 25.60 232 928 4.50
6 150 0 6.85 5.98   4   3.48
1 6.97 11.42 32.08 210 841 5.35
 
Because of it's unique dissymmetrical convolution design and close convolution pitch, PARRAP withstands higher pressures with thinner walls.  This is the most flexible hose in the industry, with superior life for your most stringent applications. PARRAP
Was tested with the bend radii reduced by 25% of the radii of Type1 flexibility in ISO 10380 thus exceeding the specifications.
PARRAP is a registered trademark of American Boa Inc.


<< Back to Hoses & Fittings


© 2007 N-TWO Cryogenic Enterprise Inc. All Rights Reserved.